check all ACPI PowerResources/GPIO again
finish battery driver
get wifi to work
convert edid to display timings and add it to devicetree
patch UEFI Shell GOP
does WinButton work without daughter board?
run i2c detect without daughter board (MPS430?)
add a picture for every IC and its location.
revisit i2c patch. maybe no need to patch 10bit address check
add pictures of every IC + location on mainboard
create a lot more documentation on how i got xyz working. (identifing sensor, logic analyzer, bla bla)
Fix devicetree always on regulators
empty I2C bus? try different pinmux; CAMS?
check BDID whith others
What is open Surface RT? OpenSource, OpenHardware, OpenedDevice
unixbench: apx vs efi
UC3L chip: SensorCollection or EmbeddedController or both?
Research how Uefi blocks LDO5 writes
Create minimal .config
Explain the root and rootwait param
rename stuff to right names
apx uboot devicetree
apx 1gb ram
operation performance points (OPP)
implement thermal zone
Wifi: reboot from UEFI to apx and see if wifi works.
Does N0 power the tCover??
explain WDSA table
check how flipping back tCover brings up screenKeyboard
Headset Mic (Bias + right input)
Digital Stereo Mic (right gpio combination)
0x28 power resource
learn about the sensor collection (0x28)
POWER_SUPPLY_PROP_STATUS + polling for capacity change
use appended devicetree if no dtb= param is provided
rip out dead mainboard and put raspi in.
case mod with some glass and RGB LEDs (+300MHz) @jwa4
USB Type-C mod with PowerDelivery. Charging, data and maybe video out @LeYuuki